Articles

R1. V. Goanta, C. Munteanu, S. Müftü, B. Istrate, P. Schwartz, S. Boese, G. Ferguson, C. I. Morăraș, Evaluation of the Fatigue Behaviour and Failure Mechanisms of 52100 Steel Coated with WIP-C1 (Ni/CrC) by Cold Spray, Materials, 15(10), 3609; https://doi.org/10.3390/ma15103609, 2022, autor correspondent, Q1, FI(2020):3.623

R2. R.O. Nastasa; A. Tufescu; C. Munteanu; B. Istrate; A. Przybył; G. Ianus, Archives of Metallurgy and Materials, Vol. 67, Is. 2, pp. 405 – 408, 2022, autor correspondent, Q4, FI(2020):0.767

R3. C. Munteanu; D.M. Vlad; E.V. Sindilar; B. Istrate; M. Butnaru; S.A. Pasca; R. O. Nastasa; I. Mihai; S.L. Burlea, Novel Mg-0.5Ca-xMn biodegradable alloys intended for orthopedic application: An in vitro and in vivo study, Materials, Vol. 14, Is. 23, Article number 7262, 2021, autor correspondent, Q1, FI(2020):3.623

R4. B. Istrate, C. Munteanu, R. Cimpoesu, N. Cimpoesu, O.D. Popescu, M.D. Vlad, Microstructural, Electrochemical and In Vitro Analysis of Mg-0.5Ca-xGd Biodegradable Alloys, APPLIED SCIENCES-BASEL, Vol. 11, Is. 3, Article Number: 981, DOI: 10.3390/app11030981, 2021, Q2, FI(2020): 2.679

R5. E.V. Sindilar, C. Munteanu, S.A. Pasca, I. Mihai, M.E. Henea, B. Istrate, Long Term Evaluation of Biodegradation and Biocompatibility In-Vivo the Mg-0.5Ca-xZr Alloys in Rats, CRYSTALS, Vol. 11 Is. 1, Article Number: 54, DOI: 10.3390/cryst11010054, 2021, autor corespondent, Q2, FI(2020): 2.589

R6. B. Istrate, C. Munteanu, S. Lupescu, R. Chelariu, M.D. Vlad, P. Vizureanu, MATERIALS, Vol. 13, Is. 14, Article Number: 3082, 2020, DOI: 10.3390/ma13143082, WOS:000554140300001, Q1, FI(2020): 3.623

R7. B. Istrate, J.V. Rau, C. Munteanu, I.V. Antoniac, V. Saceleanu, Properties and in vitro assessment of ZrO2-based coatings obtained by atmospheric plasma jet spraying on biodegradable Mg-Ca and Mg-Ca-Zr alloys, CERAMICS INTERNATIONAL, Vol. 46, Is. 10, 15897-15906 Part: B, 2020, DOI: 10.1016/j.ceramint.2020.03.138, WOS:000533512000020, Q1, FI(2020): 4.527

R8. B. Istrate, C. Munteanu, R. Chelariu, D. Mihai, R. Cimpoesu, F.S.V Tudose, Electrochemical Evaluation of Some Mg-Ca-Mn-Zr Biodegradable Alloys, REVISTA DE CHIMIE, Vol. 70, Is. 9, 3435-3440, 2019, WOS:000489958900072, Q3, FI (2019): 1.755

R9. S Lupescu, C Munteanu, B Istrate, K Earar, The Influence of Zr on Microstructure, Mechanical Properties and Corrosion Resistance in Mg-Y-Zr Biodegradable Alloys, REV.CHIM.(Bucharest),Vol. 69,No. 12, pp. 3382-3385, 2018, WOS:000458533800010, autor corespondent, Q3, FI (2019): 1.755

R10. B. Istrate, C. Munteanu, C.I. Crimu, S.I. Strugaru, M. Benchea, K. Earar, Morphological and tribological aspects of some ZrO2 coatings on Mg-Ca biodegradable alloys, Indian Journal of Engineering & Materials Sciences Vol. 23, pp. 418-424, 2016, WOS:000406728100006, Q4, FI (2020): 0.881

R11. B. Istrate, D. Mareci, C. Munteanu, S. Stanciu, C.I. Crimu, L.C. Trinca, E. Kamel, In vitro electrochemical properties of biodegradable YSZ-coated MgCa alloy, Environmental Engineering and Management Journal, Vol.15, No. 5, 955-963, 2016, WOS:000381274100002, Q4, FI(2018): 1.186

R12. B. Istrate, D. Mareci, C. Munteanu, S. Stanciu, D. Luca, C.I. Crimu, E. Kamel, In vitro electrochemical properties of biodegradable ZrO2-CaO coated MgCa alloy using atmospheric plasma spraying, Journal of Optoelectronics and Advanced Materials, 17 (7-8) pp.1186-1192, 2015, WOS:000359967600044, Q4, FI(2020): 0.587

R13. F. Ciolacu; G. Ianuș; G. Marian; C. Munteanu; V. Paleu; B. Nazar; B. Istrate; A. Gudîma; N. Daraduda, A Qualitative Assessment of the Specific Woody Biomass of Fruit Trees, Forests, Vol. 13, Is. 3, Article number 405, 2022, Q1, FI(2020): 2.634

R14. A. Goriuc; A. Jitareanu; I. Martu; C.G. Dascalu; D.C. Kappenberg-Nitescu; S.M. Solomon; A. Martu; L. Foia; I. Tapu; B. Istrate; M. Tatarciuc; I. Luchian, EXPERIMENTAL AND THERAPEUTIC MEDICINE, Vol. 22, Is. 6, Article Number 1384, DOI10.3892/etm.2021.10820, 2021, Q3, FI(2020): 2.447

R15. M. Lutcanu; M. Coteata; M.A. Bernevig; C.D. Nechifor; M.M. Cazacu; P. Paraschiv; B. Istrate; G. Badarau; I.G. Sandu; N. Cimpoesu, Obtaining and Analyzing the Al2O3-ZrO2 Ceramic Layers on Metallic Substrate, Archives of Metallurgy and Materials, Vol. 67, Is. 2, pp. 479 – 485, 2022, Q4, FI(2020):0.767

R16. C. Munteanu; V. Paleu; B. Istrate; A. Dascălu; C.C. Paleu; S. Bhaumik; A.D. Ancaş, Tribological behavior and microstructural analysis of atmospheric plasma spray deposited thin coatings on cardan cross spindles, Materials, Vol. 14, Is. 23, Article number 7322, 2021, Q1, FI(2020): 3.623

R17. S.N. Mazurchevici; A. Marguta; B. Istrate; M. Benchea; M. Boca; D. Nedelcu, Improvements of arboblend v2 nature characteristics through depositing thin ceramic layers, Polymers, Vol. 13, Is. 21, Article number 3765, 2021, Q1, FI(2020): 4.329

R18. V. Popescu; I.I. Buciscanu; M. Pruneanu; S.S. Maier; A. Danila; V. Maier; M. Pîslaru; V. Rotaru; I.N. Cristian; A. Popescu; B. Istrate; A.C. Blaga, Sustainable functionalization of PAN to improve tinctorial capacity, Polymers, Vol. 13, Is. 21, Article number 3665, 2021, Q1, FI(2020): 4.329

R19. L. Rusu; C.G. Grigoraș; E.M. Suceveanu; A.I. Simion; A.V.D. Botezatu; B. Istrate; I. Doroftei, Eco-friendly biosorbents based on microbial biomass and natural polymers: Synthesis, characterization and application for the removal of drugs and dyes from aqueous solutions, Materials, Vol. 14, Is. 17, Article number 4810, 2021, Q1, FI(2020):3.623

R20. T. Roman; D. Ghercă; A. I. Borhan; M. Grigoraș; G. Stoian; N. Lupu; I. Turcan; N. Cimpoesu; B. Istrate; I. Radu; R.S. Dănilă; A. Pui, Nanostructured quaternary Ni1-xCuxFe2-yCeyO4 complex system: Cerium content and copper substitution dependence of cation distribution and magnetic-electric properties in spinel ferrites, Ceramics International, Vol. 47, Is. 13, pp. 18177 – 18187, 2021, Q1, FI(2020): 4.527

R21. B. Ghiban; N.E. Pascu; I.V. Antoniac; G. Jiga; C. Milea; G. Petre; C. Gheorghe; C. Munteanu; B. Istrate, Surface characterization of fracture in polylactic acid vs. Pla + particle (cu, al, graphene) insertions by 3D fused deposition modeling technology, Coatings, Vol. 11, Is. 6, Article number 633, 2021. Q2, FI(2020): 2.881

R22. C. Panaghie; R. Cimpoeșu; B. Istrate; N. Cimpoeșu; M.A. Bernevig; G. Zegan; A.M. Roman; R. Chelariu; A. Sodor, New Zn-3Mg-xY alloys: Characteristics, microstructural evolution and corrosion behavior, Materials, Vol. 14, Is. 10, Article number 2505, 2021, Q1, FI(2020):3.623

R23. L.S. Baltes, S. Patachia, O. Ekincioglu, H. Ozkul, C. Croitoru, C. Munteanu, B. Istrate, M.H. Tierean, Polymer-Cement Composites Glazing by Concentrated Solar Energy, COATINGS, Vol. 11 Is. 3, Article Number: 350, DOI: 10.3390/coatings11030350, 2021, Q2, FI(2020): 2.881

R24. C.D. Radu, L. Verestiuc, E. Ulea, F.D. Lipsa, V. Vulpe, C. Munteanu, L. Bulgariu, S. Pasca, C. Tamas, B.M. Ciuntu, M. Ciocan, I. Sirbu, E. Gavrilas, C.V. Macarel, B. Istrate, Evaluation of Keratin/Bacterial Cellulose Based Scaffolds as Potential Burned Wound Dressing, APPLIED SCIENCES-BASEL, Vol. 11, Is. 5, Article Number: 1995, DOI: 10.3390/app11051995, 2021, Q2, FI(2020): 2.679

R25. C.C. Paleu, C. Munteanu, B. Istrate, S. Bhaumik, P. Vizureanu, M.S. Baltatu, V. Paleu, Microstructural Analysis and Tribological Behavior of AMDRY 1371 (Mo–NiCrFeBSiC) Atmospheric Plasma Spray Deposited Thin Coatings, Coatings, 10(12), 1186, 2020, doi.org/10.3390/coatings10121186, Q2, FI(2020): 2.881

R26. M. S. Baltatu, P. Vizureanu, A. V. Sandu, C. Munteanu, B. Istrate, Microstructural Analysis and Tribological Behavior of Ti-Based Alloys with a Ceramic Layer Using the Thermal Spray Method Coatings 2020, 10(12), 1216, 2020, doi.org/10.3390/coatings10121216, FI(2019):2.436, Q2, FI(2020): 2.881

R27. S.N. Mazurchevici, B. Pricop, B. Istrate, A.D. Mazurchevici, V. Carlescu, C. Carausu, D. Nedelcu, Technological Parameters Effects on Mechanical Properties of Biodegradable Materials Using FDM MATERIALE PLASTICE, Vol. 57, Is. 2, 215-227, 2020, WOS: 000579451200023, Q4, FI(2020):0.593

R28. E.I. Muresan, T. Malutan, D. Lutic, A. Puitel, N. Cimpoesu, B. Istrate, MACROSPHERICAL POROUS METALLOSILICATE MATERIALS: CHARACTERIZATION AND APPLICATIONS, ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL, Vol. 19, Is. 2, 195-204, 2020, WOS:000531733600002, Q4, FI(2018): 1.186

R29. N.M. Lohan, B. Pricop, M. Popa, E. Matcovschi, N. Cimpoesu, R. Cimpoesu, B. Istrate, L.G. Bujoreanu, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 28, Is. 12, 7273-7280, 2019, DOI: 10.1007/s11665-019-04473-6, WOS:000507536600010, Q4, FI(2020): 1.819

R30. EI Muresan, A Pui, T Malutan, A Coroaba, N Cimpoesu, B Istrate, M Pinteala, Hard meso/macroporous iron oxide/iron silicate macrospheres obtained by the multi-templating technique, Journal of Chemical Technology and Biotechnology, Vol. 94, Is. 9, pp. 2888-2898, DOI: 10.1002/jctb.6092, 2019, WOS:000480612500013, Q2, FI(2020): 3.174

R31. D Nedelcu, A Marguta, S Mazurchevici, C Munteanu, B Istrate, Micro-structural and morphological analyses of coated 'liquid wood' samples by ceramic particles, Materials Research Express, Vol. 6, Is. 8, Article Number: 085326, DOI: 10.1088/2053-1591/ab220b, 2019, WOS:000469826100001, Q4, FI(2020): 1.62

R32. T Roman, RL Asavei, NE Karkalos, C Roman, C Virlan, N Cimpoesu, B Istrate, M Zaharia, AP Markopoulos, K Kordatos, S Stanciu, A Pui, Synthesis and adsorption properties of nanocrystalline ferrites for kinetic modeling development, International Journal of Applied Ceramic Technology, Vol. 16, Is. 2, pp. 693-705, DOI: 10.1111/ijac.13091, 2019, WOS:000459618700026, Q2, FI(2020): 1.968

R33. C Bejinariu, C Munteanu, CD Florea, B Istrate, N Cimpoesu, A Alexandru, AV Sandu, Electro-chemical Corrosion of a Cast Iron Protected with a Al2O3 Ceramic Layer, REV.CHIM.(Bucharest),Vol. 69,No. 12, pp. 3586-3589, 2018, WOS:000458533800054, Q3, FI(2019): 1.755

R34. N Cimpoesu, F Sandulache, B Istrate, R Cimpoesu, G Zegan, Electrochemical Behavior of Biodegradable FeMnSi–MgCa Alloy, Metals 2018, 8, 541; doi:10.3390/met8070541, WOS:000445096800071, Q2, FI(2020): 2.351

R35. V Geanta, I Voiculescu, I Milosan, B Istrate, I M Mates, Chemical Composition Influence on Microhardness, Microstructure and Phase Morphology of AlxCrFeCoNi High Entropy Alloys, REV.CHIM.(Bucharest),Vol. 69,No. 4, pp.798-801, 2018, WOS:000433223000009, Q3, FI(2019): 1.755

R36. C A Ghiorghe, G Iovan, V Carlescu, B Istrate, G Pancu, S Andrian, Comparative Evaluation of Hardness and Elasticity Modulus of Tooth-Colored Materials for Dental Restoration, REV.CHIM.(Bucharest), 68, No. 11, 2623-2627, 2017, WOS:000416751800033; Q3, FI(2019): 1.755

R37. S Lupescu, B Istrate, C Munteanu, M G Minciuna, S Focsaneanu, K Earar, Characterization of Some Master Mg-X System (Ca, Mn, Zr, Y) Alloys Used in Medical Applications, REV.CHIM.(Bucharest) Vol. 68 No. 6 pp. 1408-1413, 2017, WOS:000408702900034, Q3, FI(2019): 1.755

R38. G.Zegan, R. Cimpoeşu, M. Agop, I. Ştirbu, D.L. Chicet, B. Istrate, A. Alexandru, B. Anton Prisacariu, Improving the HA deposition process on Ti-based advanced alloy through sandblasting, Optoelectronics and Advanced Materials-Rapid Communications, Vol. 10, Is, 3-4, pp. 279-284, 2016, WOS:000376707900031, Q4, FI(2020): 0.48

R39. D. Mareci, G. Bolat, B. Istrate, C. Munteanu, A. Căilean, Effect of thermal oxidation on electrochemical corrosion behavior of ZrTi alloys for dental applications, Materials and Corrosion 66 (12), pp. 1529–1535, 2015, WOS:000368419100019, Q2, FI(2020): 2.097

R40. L.C. Trincă, M. Fântânariu, C. Solcan, A.E. Trofin, L. Burtan, D.M. Acatrinei, S. Stanciu, B. Istrate, C. Munteanu, In vivo degradation behavior and biological activity of some new Mg-Ca alloys with concentration's gradient of Si for bone grafts, Applied Surface Science 352 pp.140-150, 2015, WOS:000361212200024, Q1, FI(2020): 6.707

R41. G.L. Pintilei , V.I. Crişmaru, M. Abrudeanu, C. Munteanu, D. Luca, B. Istrate, The influence of ZrO2/20%Y2O3 and Al2O3 deposited coatings to the behavior of an aluminum alloy subjected to mechanical shock , Applied Surface Science, 352 pp. 169-177, 2015, WOS:000361212200029, Q1, FI(2020): 6.707

R42. G.L. Pintilei, V.I. Crişmaru, M. Abrudeanu, C. Munteanu, E.R. Baciu, B. Istrate, N. Basescu, The behavior of ZrO2/20%Y2O3 and Al2O3 coatings deposited on aluminum alloys at high temperature regime, Applied Surface Science 352 pp.178-183, 2015, WOS:000361212200030, Q1, FI(2020): 6.707

R43. O. Parteni, C.D. Radu,A. Muresan, M.Popa, L.Ochiuz, A.V. Sandu, G.Agafitei, B. Istrate, C. Munteanu, Improving the obtaining factors of a chitosan hydrogel based biomaterial, Revista de Chimie, 10 pp,1595-1599, 2015, Q3, FI(2019): 1.755

R44. E.S. Bârcă, A.G. Plăiașu, M. Abrudeanu, B. Istrate, D. Luca, C. Munteanu, Study of the plasma deposition of Al2O3 powder on an internal combustion engine piston, JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS 17 (9-10) pp. 1522-1527, 2015, WOS:000364600400046, Q4, FI(2020): 0.587

R45. E.I. Mureșan, N. Cimpoeșu, A. Bargan, B. Istrate, Effect of the Template on the Textural Properties of the Macrospherical Trimodal Metallosilicate Materials, Journal of Inorganic and Organometallic Polymers and Materials, 25 (5) pp. 1060-1068, 2015, WOS:000359536800007, Q2, FI(2020): 3.543

R46. L.G. Bujoreanu, R. Comăneci, G. Gurău, N.M. Lohan, M.G. Suru, B. Pricop, V. Goanţă, V. Muşat, B. Istrate, E Mihalache, Thermomechanical training effects of multifunctional modules processed by high-speed high pressure torsion, Indian Journal of Engineering and Materials Sciences, 22 (4) pp. 367-375, 2015, WOS:000363078700001, Q4, FI(2020): 0.881

R47. D. Mareci, K. Earar, I. Zetu, G. Bolat, C. Crimu, B. Istrate, Comparative electrochemical behaviour of uncoated and coated NiTi for dental orthodontic wires, Materiale Plastice, 52 (2) pp. 150-153, 2015, WOS:000357767900004, Q4, FI(2020): 0.593

R48. P. Avram, M.S. Imbrea, B. Istrate, S.I. Strugaru, M. Benchea, C. Munteanu - Properties of Al2O3 and NiAlSi coatings obtained by atmospheric plasma spraying on 34CrNiMo6 substrate, Indian Journal of Engineering & Materials Sciences, 21 pp. 315-321, 2014, WOS:000339305400012, Q4, FI(2020): 0.881

R49. V. Popescu, I. Sandu, E.I. Mureşan, B. Istrate, G. Lisa, Effects of the pre-treatment with atmospheric-air plasma followed by conventional finishing, Revista de Chimie, 65 (6) pp. 676-683, 2014, WOS:000339140400010, Q4, FI(2019): 1.755

R50. I. Cimpoeşu, S. Stanciu, N. Cimpoeşu, C. Munteanu, B. Istrate, A. Ursanu, D.D. Dană, A. Alexandru, C. Nejneru, Chemical and micro-structural characterization of a copper based shape memory alloy, Journal of optoelectronics and advanced materials, 15 (11-12) pp. 1392 – 1398, 2013, WOS:000329482600039, Q4, FI(2020): 0.587

Rv51. B Istrate, T Voloseniuc, C Munteanu and Ș Lupescu, Topical Notions About in Vivo Analysis for Degradable Biomaterials with Utility in Human Body, IOP Conf. Series: Materials Science and Engineering 374 (2018) 012092 doi:10.1088/1757-899X/374/1/012092, WOS:000446775900092

Rv52. B Istrate, C Munteanu, S Lupescu, M Benchea, P Vizureanu, Preliminary Microstructural and Microscratch Results of Ni-Cr-Fe and Cr3C2-NiCr Coatings on Magnesium Substrate, IOP Conf. Series: Materials Science and Engineering 209 (2017) 012024 doi:10.1088/1757-899X/209/1/012024, WOS:000423732100024

Rv53. B. Istrate, C. Munteanu, M.N. Matei, B. Oprisan, M. Moisei, K. Earar, Microstructural analysis and mechanical properties of biodegradable Mg-1.3Ca-5.5Zr alloy, IOP Conf. Series: Materials Science and Engineering 145 (2016) 072003, WOS:000396437600119

Rv54. B. Istrate, C. Munteanu, V. Geanta, S. Baltatu, S. Focsaneanu, K Earar, Microstructural analysis of biodegradable Mg-0.9Ca-1.2Zr alloy, IOP Conf. Series: Materials Science and Engineering 147 (2016) 012033 doi:10.1088/1757-899X/147/1/012033, WOS:000390720200033

Rv55. B. Istrate, C. Munteanu, M.N. Matei, B. Oprisan, D. Chicet, K. Earar, Influence of ZrO2-Y2O3 and ZrO2-CaO coatings on Mg-1,3Ca-5,5Zr biodegradable alloy, IOP Conf. Series: Materials Science and Engineering 133, 012010, 2016, WOS:000391140000010

Rv56. C.C. Paleu, V. Paleu, B. Istrate, N. Cimpoesu, C. Munteanu, Thin coatings for pumping station mechanical components, IOP Conf. Series: Materials Science and Engineering 591, 012007, 2019, WOS:000562929900007

Rv57. S. Popescu, S. Stanciu, R. Cimpoesu, B. Istrate, N. Cimpoesu, V. Manole, I. Ionita, Electrochemical characterization of ZnMg-Ca biodegradable alloy, MATERIALS TODAY-PROCEEDINGS, Vol. 19, 1026-1031 Part: 3, DOI: 10.1016/j.matpr.2019.08.017, 2019, WOS:000496428200018

Rv58. O. Mocanita, D. Chicet, B. Istrate, P. Avram, C. Munteanu, Behavior of multilayer materials when exposed to open flame, MATERIALS TODAY-PROCEEDINGS, Vol. 19, 1073-1080 Part: 3, 2019, DOI: 10.1016/j.matpr.2019.08.023, WOS:000496428200024

Rv59. C. Stescu, C. Munteanu, D. Chicet, M. Panturu, B. Istrate, UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE, Vol. 81, Is. 2, 239-248, 2019, WOS:000487213500021

Rv60. M. Panturu, D. Chicet, S. Lupescu, B. Istrate, C. Munteanu, APPLICATIONS OF CERAMIC COATINGS AS TBCs ON THE INTERNAL COMBUSTION ENGINE VALVES, ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, Vol. 61, Is. 1, 137-142, 2018, WOS:000428903500022

Rv61. A David, A M Comanici, B Istrate, C Munteanu and P D Barsanescu, Failure surfaces morphology for specimens with stress concentrators using scanning electron microscopy, IOP Conf. Series: Materials Science and Engineering 444 (2018) 062018 doi:10.1088/1757-899X/444/6/062018, WOS:000467443600105

Rv62. S Lupescu, C Munteanu, B Istrate, D Luca, M Benchea and G Mahu, Experimental, microstructural and tribological studies of the system Mg-2Ca-5Y, IOP Conf. Series: Materials Science and Engineering 444 (2018) 032008 doi:10.1088/1757-899X/444/3/032008, WOS:000467443600030

Rv63. G Mahu, C Munteanu, B Istrate, M Benchea and S Lupescu, Influence of Al2O3-13TiO2 powder on a C45 steel using atmospheric plasma spray process, IOP Conf. Series: Materials Science and Engineering 444 (2018) 032010 doi:10.1088/1757-899X/444/3/032010, WOS:000467443600032

Rv64. O Mocănița, D L Chicet, C Munteanu, B Istrate and B Oprișan, Fire-resistant behaviour of some cellular materials treated with intumescent solutions, IOP Conf. Series: Materials Science and Engineering 444 (2018) 032011 doi:10.1088/1757-899X/444/3/032011, WOS:000467443600033

Rv65. M Panțuru, D L Chicet, C Munteanu, B Istrate and P Avram, Microstructural aspects at coating-substrate interface for some thermal sprayed layers on valve discs, IOP Conf. Series: Materials Science and Engineering 444 (2018) 032009 doi:10.1088/1757-899X/444/3/032009, WOS:000467443600031

Rv66. C Stescu, D L Chicet, C Munteanu, B Istrate, M Benchea and G-N Basescu, Aspects regarding the influence of the processing regime on the surface quality of thermal sprayed coatings, IOP Conf. Series: Materials Science and Engineering 444 (2018) 032012 doi:10.1088/1757-899X/444/3/032012, WOS:000467443600034

Rv67. G. Mahu, C. Munteanu, B. Istrate, M. Benchea, Analysis of plasma jet depositions on a C45 steel used in crankshaft manufacturing, POWDER METALLURGY AND ADVANCED MATERIALS, Book Series: Materials Research Proceedings, Vol. 8, 61-69, DOI: 10.21741/9781945291999-7, WOS:000452925200007

Rv68. S Dobrița, B Istrate, N Cimpoeșu, S Stanciu, V Apostol, R Cimpoeșu*, I Ioniță and P Paraschiv, Preliminary Results on the Corrosion Behaviour of a New Biodegradable Metallic Material Based on Zinc, IOP Conf. Series: Materials Science and Engineering 374 (2018) 012027 doi:10.1088/1757-899X/374/1/012027, WOS:000446775900027

Rv69. C D Florea, C Bejinariu, C Munteanu, B Istrate, S L Toma, A Alexandru and R Cimpoesu*, Corrosion Resistance of a Cast-Iron Material Coated With a Ceramic Layer Using Thermal Spray Method, IOP Conf. Series: Materials Science and Engineering 374 (2018) 012028 doi:10.1088/1757-899X/374/1/012028, WOS:000446775900028

Rv70. A Savin, P Vizureanu, Z Prevorovsky, M Chlada, J Krofta, M S Baltatu, B Istrate and R Steigmann, Noninvasive Evaluation of Special Alloys for Prostheses Using Complementary Methods, IOP Conf. Series: Materials Science and Engineering 374 (2018) 012030 doi:10.1088/1757-899X/374/1/012030, WOS:000446775900030

Rv71. V. GEANTĂ, I. VOICULESCU, B. ISTRATE, D. M. VR NCEANU, R. CIOCOIU, C. M. COTRUȚ, The Influence of Chromium Content on the Structural and Mechanical Properties of AlCrxFeCoNi High Entropy Alloys, International Journal of Engineering Research in Africa, ISSN: 1663-4144, Vol. 37, pp 23-28, 2018, doi:10.4028/www.scientific.net/JERA.37.23, WOS:000444288100003

Rv72. S Lupescu, C Munteanu, B Istrate, S Stanciu, N Cimpoesu, B Oprisan, Microstructural Investigations on Alloy Mg-2Ca-0.2Mn-0.5Zr-1Y, IOP Publishing IOP Conf. Series: Materials Science and Engineering 209 (2017), 012018 doi:10.1088/1757-899X/209/1/012018, WOS:000423732100018

Rv73. M G Minciuna, P Vizureanu, M M B Abdullah, D C Achitei, B Istrate, R Cimpoesu, S C Focsaneanu, Surface Characterization of New Biomaterials, IOP Publishing IOP Conf. Series: Materials Science and Engineering 209 (2017) 012022 doi:10.1088/1757-899X/209/1/012022, WOS:000423732100022

Rv74. G Mahu, C Munteanu, B Istrate, M Benchea, Plasma sprayed coatings on crankshaft used steels, IOP Conf. Series: Materials Science and Engineering 227 (2017) 012077 doi:10.1088/1757-899X/227/1/012077, WOS:000409221600077

Rv75. P. Simion, V. Dia, B. Istrate, G. Hrituleac, I. Hrituleac, C. Munteanu, Study of fatigue behavior of longitudinal welded pipes, IOP Conf. Series: Materials Science and Engineering 145 (2016) 022032, WOS:000396437600032

Rv76. V. Paleu, S. Georgescu, C. Baciu, B. Istrate, E. R. Baciu, Preliminary experimental research on friction characteristics of a thick gravitational casted babbit layer on steel substrate, IOP Conf. Series: Materials Science and Engineering 147 (2016) 012028 doi:10.1088/1757-899X/147/1/012028, WOS:000390720200028

Rv77. C. Paulin, D.L. Chicet, B. Istrate, M. Panțuru, C. Munteanu, Corrosion behavior aspects of Ni-base self-fluxing coatings, IOP Conf. Series: Materials Science and Engineering 147 (2016) 012034 doi:10.1088/1757-899X/147/1/012034, WOS:000390720200034

Rv78. D.C. Achiţei, M.G. Minciună, P. Vizureanu, A.V. Sandu, R. Cimpoeşu, B. Istrate, Study on structure and properties of CuZn40Pb alloy, IOP Conf. Series: Materials Science and Engineering 133, 012015, 2016, WOS:000391140000015

Rv79. E. Mihalache, B. Pricop, M.G. Suru, N.M. Lohan, R.I. Comăneci, B. Istrate, B. Özkal, L.G. Bujoreanu, Factors influencing martensite transitions in Fe-based shape memory alloys, Matec Web of Conferences 33, 04002 pp. 1-6, 2015, WOS:000372402800039

Rv80. B. Pricop, U. Söyler, B. Özkal, M.G. Suru, N.M. Lohan, R.I. Comăneci, N. Cimpoeşu, V.Muşat, G. Gurău, B. Istrate, E. Mihalache, L.G. Bujoreanu, A study of martensite formation in powder metallurgy Fe-Mn-Si-Cr-Ni shape memory alloys, Materials Today: Proceedings 2S pp. S789 – S792, WOS:000372402800041

Rv81. E.S. Bârcă, V. Rizea, M. Abrudeanu, A.G. Plăiaşu, B. Istrate, C. Munteanu, A comparative study of morphology and composition on oxide nanopowders elaborated by SPVD, IOP Conference Series-Materials Science and Engineering 95 012028, 2015, WOS:000365128900028

Rv82. B. Pricop, E. Mihalache, N.M. Lohan, B. Istrate, M. Mocanu, B. Ozkal, L.G. Bujoreanu, Powder metallurgy and mechanical alloying effects on the formation of thermally induced martensite in an FeMnSiCrNi SMA, Matec Web of Conferences 33, 04002 pp. 1-6. 2015, WOS:000371032100070

R1. B. Istrate, C. Munteanu, Tribological aspects of some biodegradable magnesium alloys, INCAS Bulletin, Volume 12, Issue 1, 2020, Pages 83-89, DOI: 10.13111/2066-8201.2020.12.1.8

R2. G. Mahu, C. Munteanu, B. Istrate, I. Blanari, C. Paleu, C.M. Cotrut, Evaluation of the corrosion resistance of some coating obtained by thermal spray in plasma jet, on the surface of some crankshafts made of C45 steel, Revista de Chimie, Vol. 71, Is. 10, 211-223, 2020, DOI: 10.37358/RC.20.10.8366, autor corespondent

R3. B. Oprisan, D. Vasincu, S. Lupescu, C. Munteanu, B. Istrate, D. Popescu, C. Condratovici, A.R. Dimofte, K. Earar, Electrochemical analysis of some biodegradable Mg-Ca-Mn alloys, Revista de Chimie, Volume 70, Issue 12, 2019, Pages 4525-4530, DOI: 10.37358/RC.19.12.7788, autor corespondent

R4. B Istrate, C Munteanu, S Lupescu, V-I Antoniac and E Sindilar, Structural Characterization of Mg-0.5Ca-xY Biodegradable Alloys, Key Engineering Materials, ISSN: 1662-9795, Vol. 782, pp 129-135, doi:10.4028/www.scientific.net/KEM.782.129

R5. B. Istrate, C.I. Crimu, C. Munteanu, Microstructural analysis of Mg-Ca and Mg-Si-Ca biodegradable alloys, International Journal of Modern Manufacturing Technologies, 7 (1) pp. 36-41, 2015

R6. B. Istrate, C.I. Crimu, S. Stanciu, B. Oprișan, C. Munteanu, Comparative XRD and microstructure analysis on biodegradable Mg-Si-Ca alloys, Key Engineering Materials 660 pp. 51-56, 2015, DOI: 10.4028/www.scientific.net/KEM.660.51

R7. B. Istrate, C. Munteanu, S.I. Strugaru, A. Barca, C. Biniuc, C.I. Crimu, Influence of time on thermal oxidation of CP-Ti Grade II at 850 ºC, Key Engineering Materials, 614 pp. 35-40, 2014, DOI: 10.4028/www.scientific.net/KEM.614.35

R8. B. Istrate, C. Munteanu, D. Luca, E. Kamel, E.S. Barca, I. Antoniac, Tribological tests and SEM analysis for titanium oxide layers, Key Engineering Materials, 614 pp. 74-79, 2014, DOI: 10.4028/www.scientific.net/KEM.614.74

R9. B. Istrate, C. Munteanu, P. Simion, V. Dia, P. Avram, C.I. Crimu, E. Kamel, Influence of the degree of cold drawing over the wear test and XRD analysis of pipes used for dampers, Applied Mechanics and Materials, 659 pp. 85-90, 2014, DOI: 10.4028/www.scientific.net/AMM.659.85

R10. B. Istrate, C.I. Crimu, C. Munteanu,C. Biniuc, L.G. Pintilei, S.C. Strugaru Iacob, P. Avram, E. Kamel, Structural modification of α-Ti based alloy after submission to open flame thermal shock, Key Engineering Materials, 638 pp. 333-338, 2014, DOI: 10.4028/www.scientific.net/KEM.638.333

R11. C. Stescu, D. Chicet, A. Tufescu, B. Istrate, C. Munteanu, S.I. Strugaru, Contact stress simulation problem in case of thermal spray coatings, IOP Conference Series: Materials Science and Engineering, Vol. 916, Is. 1, 2020, Article number 012114, 10.1088/1757-899X/916/1/012114

R12. A. Savin, F. Novy, M.L. Craus, N. Iftimie, R. Steigmann, B. Istrate, C. Munteanu, Assessment of magnesium calcium alloys improved by rare earths addition for medical implants, Vol. 916, Is. 1, 2020, Article number 012099, 10.1088/1757-899X/916/1/012099

R13. O. Mocanita, D.L. Chicet, O. Rusu, B. Istrate, C. Munteanu, Expanded Foam Glass - An Application for Fire Resistant Multilayer Materials, IOP Conference Series: Materials Science and Engineering, Vol. 877, Is. 1, 2020, Article number 012038, 10.1088/1757-899X/877/1/012038

R14. C. Cîrlan Paleu, B. Istrate, V. Paleu, C. Munteanu, Technological and structural analysis of Al2O3 40TiO2 coating deposited on a shaft sleeve of hydraulic pump, IOP Conference Series: Materials Science and Engineering, Vol. 724, Is. 1, 2020, Article number 012063, DOI: 10.1088/1757-899X/724/1/012063

R15. V. Paleu, C. Cîrlan Paleu, B. Istrate, S. Bhaumik, C. Munteanu, Friction and wear resistance of Al2O3 40TiO2 (AMDRY 6250) coating of a pump shaft sleeve bearing, IOP Conference Series: Materials Science and Engineering, Vol. 724, Is. 1, 2020, Article number 012064, DOI: 10.1088/1757-899X/724/1/012064

R16. M. Luţcanu, N. Cimpoeşu, B. Istrate, M. Coteaţǎ, V. Manole, I. Ştirbu, F. Dimitriu, Procedia Manufacturing, Vol. 47, 2020, Pages 808-811, DOI: 10.1016/j.promfg.2020.04.249

R17. C. Cirlan Paleu, V. Paleu, B. Istrate, N. Cimpoesu, C. Munteanu, IOP Conference Series: Materials Science and Engineering, Vol. 591, Is. 1, 2019, Article number 012007, DOI: 10.1088/1757-899X/591/1/012007

R18. O. Mocanita, D. Chicet, B Istrate, C. Micu, C. Munteanu, Investigation of thermal coating influence on the fire resistance of a multi-layer material, IOP Conference Series: Materials Science and Engineering, Vol. 572, Is. 1, 2019, Article number 012052, DOI: 10.1088/1757-899X/572/1/012052

R19. A. Savin, N. Iftimie, R. Steigmann, G.S. Dobrescu, B. Istrate, C. Munteanu, Ultrasound methods for determining the influence of yttrium in Mg-0.5Ca-xY, IOP Conference Series: Materials Science and Engineering, Vol. 572, Is. 1, Article number 012017, DOI: 10.1088/1757-899X/572/1/012017

R20. S.D. Popescu, S. Stanciu, R. Cimpoeşu, B. Istrate, I. Ştirbu, I. Ionita, B.A. Prisecariu, Phases and compounds composition analyze of ZnMgCa biodegradable alloy, IOP Conference Series: Materials Science and Engineering, Vol. 572, Is. 1, 2019, Article number 012019, DOI: 10.1088/1757-899X/572/1/012019

R21. C Munteanu, S Lupescu, B Istrate, V-I Antoniac, M Benchea and A Savin, Some Tribological Aspects of Mg-0.5Ca-xY Biodegradable Materials, Key Engineering Materials, Vol. 782, pp 136-141, doi:10.4028/www.scientific.net/KEM.782.136

R22. V Paleu, V Goanţă, B Istrate, Experimental investigation on wear resistance of a new cutting fluid using a four ball tribometer – optimization of additive percent, MATEC Web of Conferences 112, 07026 (2017), DOI: 10.1051/matecconf/20171120702

R23. M. S. Bălțatu, P. Vizureanu, M. Benchea, M. G. Minciună, D. C. Achiței, B. Istrate, Ti-Mo-Zr-Ta Alloy for Biomedical Applications: Microstructures and Mechanical Properties, Key Engineering Materials, ISSN: 1662-9795, Vol. 750, pp 184-188, doi:10.4028/www.scientific.net/KEM.750.184, 2017

R24. C Stescu, C Munteanu C, D Luca, B Istrate, M Benchea, D Chicet, B Oprisan, Increasing Wear Resistance of Power Steering Pump Cam Using Ni-Cr-Fe and Ni-Cr-Fe-B Coatings, Materials Science Forum, ISSN: 1662-9752, Vol. 907, pp 145-150, doi:10.4028/www.scientific.net/MSF.907.145, 2017

R25. O Mocănița, D Chicet, M Benchea, B Istrate, C Munteanu, Coating of Liquid Wood Sheets, Materials Science Forum , ISSN: 1662-9752, Vol. 907, pp 134-139, 2017, doi:10.4028/www.scientific.net/MSF.907.134, 2017

R26. D. C. ACHIŢEI, P. VIZUREANU, M. G. MINCIUNĂ, N. CIMPOEŞU, B. ISTRATE, Improvement of Structural Characteristics for CuZn Alloy through Heat Treatments, Key Engineering Materials, ISSN: 1662-9795, Vol. 750, pp 3-8, doi:10.4028/www.scientific.net/KEM.750.3, 2017

R27. C. A. TUGUI, P. VIZUREANU, M. C. PERJU, C. NEJNERU, B. ISTRATE, A. SAVIN, Investigations of Thin Films Obtained by Plasma Jet Method on a Stainless Steel Used in Turbine Blades Construction, Key Engineering Materials, ISSN: 1662-9795, Vol. 750, pp 85-90, doi:10.4028/www.scientific.net/KEM.750.85, 2017

R28. C Florea, C Bejinariu, C Savin, B Istrate, M Benchea, R Cimpoesu, Adhesion Characterisation of Complex Ceramics Thin Layers Deposited on Metallic Substrate, Materials Science Forum, ISSN: 1662-9752, Vol. 907, pp 126-133, doi:10.4028/www.scientific.net/MSF.907.126, 2017

R29. M.S. Bălţatu Mădălina, P. Vizureanu, B. Istrate, Physical and structural characterization of Ti-based alloy, International Journal of Modern Manufacturing Technologies, Vol. VII, No. 2, pp. 12-17, 2015

R30. C. Biniuc, B. Istrate, C. Munteanu, L. Dorin, Increased resistance to mechanical shock of metallic materials by metal-ceramic surface coatings, Key Engineering Materials, 638 (2014) 316-321, DOI: 10.4028/www.scientific.net/KEM.638.316

R31. P. Simion, V. Dia, B. Istrate, C. Munteanu, Controlling and Monitoring of Welding Parameters for Micro-alloyed Steel Pipes Produced by High Frequency Electric Welding, Advanced Materials Research, 1036 pp. 464-469, 2014, DOI: 10.4028/www.scientific.net/AMR.1036.464

R32. P. Avram, B. Istrate, M.S. Imbrea, M.V. Lozneanu, C. Paulin, C. Munteanu, Friction studies over idlers sprayed with Al2O3 powder using Athmosferic plasma spraying method, Advanced Materials Research, 1036 pp. 218-222, 2014, DOI: 10.4028/www.scientific.net/AMR.1036.218

R33. R. Ionescu, E. Vasile, C. Munteanu, B. Istrate, M. Niculescu- Structural and surface characterization of some ceramic coatings obtained by plasma jet spraying on metallic biomaterials substrates, Key Engineering Materials, 614 pp. 68-73, 2014, DOI: 10.4028/www.scientific.net/KEM.614.68

R34. C. Crimu, C. Munteanu, S. Stanciu, B. Istrate, K. Earar, Comparative in vitro study on MgCa and MgCaSi, as biodegradable implants, Applied Mechanics and Materials, 659 pp. 75-80, 2014, DOI: 10.4028/www.scientific.net/AMM.659.75

R35. A. Bârcă, B. Istrate, E.S. Bârcă Eduard, V.I. Crîşmaru, C. Munteanu, Corrosion behaviour of a cermet deposited coating in sulfuric acid solution, Applied Mechanics and Materials, 659 pp. 28-33, 2014, DOI: 10.4028/www.scientific.net/AMM.659.28

R36. A. Bârcă, E.S. Bârcă, B. Istrate, V.I. Crismaru, C. Munteanu, A Study on Plastic Deformations due to Contact Fatigue Wear on a Cermet Coating Deposited by Thermal Spraying Methods, Applied Mechanics and Materials, 659 pp. 34-39, 2014, DOI: 10.4028/www.scientific.net/AMM.659.34

R37. P. Avram, B. Istrate, M.S. Imbrea, C. Axinte, C. Paulin, S.C. Iacob Strugaru, C. Munteanu, Contact Wear Studies Over Idlers Sprayed With Ni Al Si Powder Using Atmospheric Plasma Spraying Method, Advanced Materials Research 1036 pp. 184-188, 2014, DOI: 10.4028/www.scientific.net/AMR.1036.184

R38. P. Simion, B. Istrate, C. Munteanu, V. Dia, P. Avram, M. S. Imbrea, Influence of the Degree of Cold Drawing on the Microstructure and Properties of Pipes Used for Dampers, Advanced Materials Research, 1036 pp. 134-139, 2014

R39. C. I. Crimu, B. Istrate, C. Munteanu, I. Antoniac, M.N. Matei, K. Earar, XRD and Microstructural Analyses on Biodegradable Mg Alloys, Key Engineering Materials, 638 pp. 79-84, 2014, DOI: 10.4028/www.scientific.net/KEM.638.79

R40. P. Avram, M. S. Imbrea, B. Istrate, S. I. Strugaru, I. Cucos, C. Axinte, C. Munteanu, Wear Resistance and XRD Analyses of CMoCuNiCrSiBO Coatings Obtained by Thermal Deposition on OLC45 Substrate, Applied Mechanics and Materials, 659 pp. 10-15, 2014, DOI: 10.4028/www.scientific.net/AMM.659.10

R41. C. Crimu, I. Antoniac, S. Focşăneanu, D. Pitul Cristea, B. Istrate, C. Munteanu, K. Earar, The Study Of Microstructure Of The Mgca Alloys In Their Use In Biodegradable Orthopedic Implants, Advanced Materials Research, 1036 pp. 207-211, 2014, DOI: 10.4028/www.scientific.net/AMR.1036.207

R42. V51. P. Avram, M. S. Imbrea, B. Istrate, S. I. Strugaru, I. Cucos, C. Axinte, C. Munteanu, Wear Resistance and XRD Analyses of CNiCrSiBO Coatings Obtained by Thermal Deposition on OLC45 Substrate, Applied Mechanics and Materials, 659 pp. 16-21, 2014, DOI: 10.4028/www.scientific.net/AMM.659.16

R43. M. Rățoi, G. Dascălu, T. Stanciu, S.O. Gurlui, S. Stanciu, B. Istrate, N. Cimpoeşu, R. Cimpoeşu, Preliminary results of FeMnSi+Si(PLD) alloy degradation, Key Engineering Materials, 638 pp. 117-122, 2014

Articles

Work Together!

Email & Phone

Address